Konfigurasi Acces List INBOUND Cisco

oke pertama-tama buat topologi kayak diatas okkkkk, yang perlu kita setting hanya router aja, karena kita bakal pake dhcp poolnya router. lu pada ngertikan? kalo belom masa udah sampe access list sih :v

Setting ip + DHCP

1. Router0

en
conf t
int gig0/0
ip add 192.168.0.1 255.255.255.248
no shutdown
int gig0/1
ip add 12.12.12.1 255.255.255.252
no shutdown
exit
ip dhcp pool A1
default-router 192.168.0.1
network 192.168.0.0 255.255.255.248
exit
ip dhcp excluded-address 192.168.0.1
do write

2. Router1

en
conf t
int gig0/0
ip add 172.168.0.1 255.255.255.252
no shutdown
int gig0/1
ip add 12.12.12.2 255.255.255.252
no shutdown
exit
ip dhcp pool A2
default-router 172.168.0.1
network 172.168.0.0 255.255.255.252
exit
ip dhcp excluded-address 172.168.0.1
do write

Routing Static

3. Router0

ip route 172.168.0.0 255.255.255.252 12.12.12.2
do wr

4. Router1

ip route 192.168.0.0 255.255.255.248 12.12.12.1
do wr

Acces List

5. Router1

conf t
access-list 1 deny 192.168.0.3 0.0.0.0
access-list 1 permit any
int gig0/1
ip access-group 1 in
do wr

4. Test Ping

pasti salah satu gak bisa >> failed


masih gak bisa? nih ada link buat lu belajar >>> link?